Gold Member Since 2015
Audited Supplier
Nie-Tech Co., Ltd.

Light Control Sensor, Nitrogen Gas Sensor, Z-Wave Gas Sensor manufacturer / supplier in China, offering Z-Wave APP Control Gas Sensor (ZW1106), Z-Wave Smart Smoke Sensor for Home Automation, Z-Wave Smart Wireless Smoke and Heat Detector and so on.

(/ )

Supplier Homepage Product Pressure Sensor Z-Wave APP Control Gas Sensor (ZW1106)

Z-Wave APP Control Gas Sensor (ZW1106)

Purchase Qty.:
1-999 1,000+
FOB Unit Price: US $42 US $21
Purchase Qty. (Pieces) FOB Unit Price
1-999 US $42
1,000+ US $21
Get Latest Price
Port: Shenzhen, China
Production Capacity: 3000
Payment Terms: L/C, T/T, D/P, Western Union, Paypal, Money Gram

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: ZW1106
  • Material: Plastic
  • Customized: Customized
  • Range: Min 30m Line of Sight
  • Frequency: 868.42MHz/865.2MHz/869.0MHz/908.42MHz/921.42MHz
  • Net Weight: 200g
  • Work with: Z-Wave Controlled
  • Trademark: EVA LOGIK
  • Specification: 128(Diameter)*38mm
  • HS Code: 853110000
  • Type: Inductive Pressure Sensor
  • Certification: FCC/IC/Ncc
  • Operation: AC Power 5V 1A
  • Color: White
  • Detecting: Natural Gas,LPG Gas,Corbon Monoxide
  • Functions: Sends Alert When Detect Gas
  • Standard/Approval: FCC/IC/Ncc/Z-Wave Certied
  • Transport Package: Neutral Packing
  • Origin: Dongguan, China
Product Description
Z-wave APP Control Gas Sensor (ZW1106)


This is a Z-Wave enabled device (interoperable, two-way RF mesh networking technology) and is fully compatible with any Z-Wave enabled network. Every mains powered Z-Wave enabled device acts as a signal repeater and multiple devices result in more possible transmission routes which helps eliminate "RF dead-spots".


Technical data

Operating VoltageDC9~16V of AC 220V
Static Current<90mA
Alarm Current<100mA
Range30m line of sight
Warm-up Timeabout 180s
Alarm Indicatorred LED flash
Sound Level>85dB/m
Failure Indicatoryellow LED on&beeper long-buzz



1. Release the bracket from the devise by press the locking tab, fix the screw into the wall firmly, then hang the detector. And the position should be height from floor 1m, semi-diameter to gas source <1.5m;

2. All wires installation must accord with National and Local effective laws and criteria. The wires must have the suitable size and colorful marks for avoiding connecting error. 

3. For "Add" in a network: Put the Z-wave interface controller into "Add" mode, and following its instruction to add the ZW14 to your controller. To get in the "Add" mode, the distance between siren and controller is suggested to be in one meter. Open the bracket and press the learn switch of ZW14 for 1 second at least & release to be included. After setting, the LED setting lighting should go off, if not, please try again. 

4. For "Remove" from a network: set up the Z-wave interface controller into "Remove" mode, and following its instruction to delete the ZW14 from your controller. Press the learn switch of ZW14 for 1 second at least &release to be excluded. 

5.For set a "Condition": set up the Z-wave interface controller into "Condition" mode, set when ZW14 Gas detector trigger Gas valve shut off.


Shipping & PackingZ-Wave APP Control Gas Sensor (ZW1106)

Send your message to this supplier
Mrs. Irene
To: Mrs. Irene

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now