Z-Wave Smart Home Flood Sensor with Ce (ZW104)
|FOB Unit Price:||US $33 US $19|
|Purchase Qty. (Pieces)||FOB Unit Price|
|Payment Terms:||L/C, T/T, D/P, Western Union, Paypal, Money Gram|
- Model NO.: ZW104
- Accuracy Grade: 1.0G
- Certification: RoHS, SGS, Ce
- Battery Operation: AAA * 3PCS (Battery Life 1 Year)
- Range: Min 30m Line of Sight
- Frequency: 868.42MHz/865.2MHz/869.0MHz/908.4MHz/921.4MHz
- Installation Type: Wall-Mounted Type
- Contact: Contactless
- Trademark: EVA LOGIK
- Specification: plastic
- HS Code: 9025900001
- Measuring Medium: Steam
- IP Rating: IP56
- Customized: Customized
- Sensitivity Level: 0.8mm Perceived Level
- Sensing Type: White
- Dimensions(L*W*H): 78*42*16mm
- Operating Temp: 0~40 Degrees
- Production Process: Injection
- Transport Package: Neutral Packing
- Origin: China Guangdong
Z-wave Smart Home Flood Sensor with CE(ZW104)
Technical data Installation
This device is an accessory of the Z-Wave system and enable alert/monitor system when water leak detected , easy installation, works with z-wave controller. ZW104 is a wireless, battery powered sensor, its two parts the sensor's body and a probe connected.
|Battery Operation||1.5V AAA * 3pcs (battery life 1 year)|
|Range||Min 30m line fo sight|
|Sensitivity level sensor||0.8mm perceived level|
|Operating temp||0~40 ºC|
1. First, add ZW104 to ZE200 controller or others, it must be in range of the controller, because the procedure of add to the ZE200 requires direct communication with the controller.
2. Set controller to "Add" mode, quickly pressing learn switch three times (the button is also the anti-packing switch).
4. For "Remove" from a network: set up the Z-wave interface controller into "Remove" mode, and following its instruction to delete the ZW104 from your controller. Press the learn switch of ZW104 for 1 second at least &release to be excluded.
5.Use double EVA or screws to fix ZW104 on the Door/Window two sides, pls. be note correction position of the sensor and the magnet (dot-to-dot).
6.Re-setting ZW104: Remove the battery, touch the senor's body with magnet,
re-install battery, trigger ZW104 one time, and reset will be confirmed by LED blink.