Z-Wave Remote Controlled Electrical Dimmer Switch (ZW244)
|FOB Unit Price:||US $48 US $19|
|Purchase Qty. (Pieces)||FOB Unit Price|
|Transport Package:||Neutral Packing / Depends on Customer′s Request|
|Payment Terms:||L/C, T/T, D/P, Western Union, Paypal, Money Gram|
- Model NO.: ZW244
- Feature: Flat
- Type: Normal Open
- Structure: Power Built-in Type
- Kind: Single-pole on-off Switch
- Detection Method: Correlation Type
- Certification: SGS, CE
- Maximum Load: 800W
- Net Weight: 110g
- Frequency: 868.42MHz/869.0MHz
- Specification: 86*86*36(mm)
- HS Code: 8531901000
- Protection: Waterproof
- Application: Home Appliance, Electronics, Lighting, Industrial, Apartment/Villa, Hotel, Commercial, Home
- Number of Switch: Single Control Switch
- Usage: Control Button, Control Switch
- Contact Type: Type a Contact
- Brand: EVA Logik
- Voltage: 230VAC /60Hz
- Range: Min 30m Line of Sight
- Marketing: Europe, Asia(Russia),Cn
- Trademark: EVA LOGIK
- Origin: Dongguan, China
This module is designed to operate in a wall switch box or in locations where the control of an electric device is needed. It is also possible to send a signal to any system that is to be integrated with Z-wave system.
|Operating Voltage||230Vac/60Hz 120VAC/50HZ|
|Operation Temperature||0 ~ 60ºC|
|Maximum Load||4A (800W)*3|
|Range||30m line of sight|
|Dimensions(L*W*H)||86* 86 *36mm|
1. Before installation ensure that the voltage supply is disconnected.
2. Correctly connect ZW24 as shown on above diagram.
3. For "Add" in a network: Put the Z-wave interface controller into "Add" mode, and following its instruction to add the ZW24 to your controller. To get in the "Add" mode, the distance between ZW24 module and controller is suggested to be in one meter. Pressing the first touch switch of ZW24 till the indicate light flash, when fast flash 3 times it successful add into gateway network.
4. For "Remove" from a network: set up the Z-wave interface controller into "Remove" mode, and following its instruction to delete the ZW24 from your controller. Pressing the first touch switch of ZW24 till the indicate light flash, when fast flash 2 times it successful remove from gateway network.
5. For "Condition" which is controlling other devices of Z-wave system, Condition ensures direct transfer of control commands between devices, and is performed without participation of the main controller. e.g. Dimmer, Switch (ON-OFF), Door/Window sensor, PIR, Shutter or scene (scene may be controlled only through the ZE300 gateway).