Gold Member Since 2015
Audited Supplier
Nie-Tech Co., Ltd.

Wall Mounted Outlet with Power Meter, Wall Mounted Outlet, Z Wave Wall Mounted Outlet manufacturer / supplier in China, offering Z-Wave Wall Mount Power Mater Outlet for Home Automation, Zw76s Z-Wave Module Switch 230V 2200W Smart Home, Outdoor Laser Light 20 Patterns RGB Lighting Projector Show Party Garden Light and so on.

(/ )

Supplier Homepage Product Wall Socket Z-Wave Wall Mount Power Mater Outlet for Home Automation

Z-Wave Wall Mount Power Mater Outlet for Home Automation

Purchase Qty.:
(Pieces)
1-999 1,000+
FOB Unit Price: US $49 US $18
Purchase Qty. (Pieces) FOB Unit Price
1-999 US $49
1,000+ US $18
Get Latest Price
Port: Shenzhen, China
Production Capacity: 1000pieses/Month
Payment Terms: L/C, T/T, D/P, Western Union, Paypal, Money Gram

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: ZWP32
  • Type: Without Switch
  • Shell Material: Flame Retardant PC Plastic
  • IP Rating: IP20
  • Number of Holes: Porous
  • Range: Min 30m Line of Sight
  • Frequency: 908.42MHz
  • Trademark: EVA LOGIK
  • Specification: 115(L)*70(W)*44(H)mm
  • HS Code: 8536690000
  • Grounding: Self Grounding
  • Rated Current: 15AMP
  • Application: Commercial, Residential/General-Purpose
  • Certification: SGS, UL, FCC
  • Maxload: 600W (Incandescent), 1800W(Resistive)
  • Net Weight: 130g
  • Metering: Electrical Power Load in W / Electrical
  • Transport Package: Neutral Packing
  • Origin: Dongguan China
Product Description
ZWP32 Wall Mounted Outlet Built-in Power Meter
   
Introduction
 
This ZWP32 Duplex Receptacle is designed to work with other Z-WAVE enabled devices.
Z-WAVE nodes of other types can be Included in the system and will also act as repeaters.
 This is useful when the device would otherwise be out of the radio range of the wireless controller.
The top outlet is active and the bottom is controlled through Z-wave or through the manual button on the outlet as is typical for a Z-wave outlet.

 
Technical data
 
LoadIncandescent: 600W maximum, 120 VAC.
Resistive: 15 amps (1800W) maximum, 120 VAC
Motor1/2 H.P. maximum, 120 VAC
RangeMin 30m line of sight
Dimensions115(L)*70(W)*44(H)mm
Net weight130g
Frequency- 908.42 MHz
Meteringelectrical power load in W / electrical power work in kWh


 





Installation
 
1. Before installation ensure that the voltage supply is disconnected.

2. Connect ZWP32 module as shown on above diagram.

3. Connect the device in accordance with the wiring diagram presented in Wiring diagram. Switch on 120V of the mains voltage.

4. For "Add" in a network: Put the Z-wave interface  controller into "Add" mode, and following its instruction to add the ZWP32 to your controller. To get in the "Add" mode, the distance between ZWP32 module and controller is suggested to be in one meter. Quickly pressing the learn switch of ZWP32 three times for 1 second at least & release to be included. 

5. For "Remove" from a network: set up the Z-wave interface controller into "Remove" mode, and following its instruction to delete the ZWP32 from your controller. Press the learn switch of ZWP32 three times for 1 second at least & release to be excluded.
 


Safety and maintenance instruction

-       Make sure that all electric connections and connection cables meet the pertaining regulations and are in conformity with the operating instruction.

-       Do not overload electrical outlets or extension cords, fire or electric shocks can be the result.

-       Please contact an expert in case you have any doubts about the mode of operation, the safety or connecting the appliances.

-       Keep all parts away from young children's reach.

---You can send e-mail to us.We are sure to reply you in 24 hours.You can also talk with us throught trade manager.If we are not online,you can leave us a message.We will reply you asap.Do not store this item on wet, very cold or warm places, this can damage the electronic circuit boards.

-       Avoid dropping or shocks, this can damage the electronic boards.

-       Never replace damaged power cables yourself! In such case, remove them from the net and take the devices to a workshop.

-      Wireless system are subject to interference from cordless phones, microwaves, and other wireless devices during installation and operation.
 

Maintenance

The devices are maintenance-free, so never open them. The guarantee becomes void when you open the appliance. Only clean the outside of the devices with a soft, dry cloth or a brush. Prior to cleaning, remove the devices from all voltage sources.



NOTE!

Do not use any carboxylic cleaning agents or petrol, alcohol or similar. These will attack the surface of devices. Besides, the vapors are hazardous to your health and explosive. Do not use any sharp edged tools, screw drivers, metal brushes or similar for cleaning.
 
Warranty 1 year


FAQ
1.How can I buy this Model?
---You can send e-mail to us.We are sure to reply you in 24 hours.You can also talk with us throught trade manager.If we are not online,you can leave us a message.We will reply you asap.
 
2.What is your warranty?
---For any of our models,we provide 12 months warranty.If the model is broken or can not work,We will prepare 0.1-0.3% etra models.If the product have been broken because of quality problem.You can send them back.You just need pay the return shipping fee.We will send you new models instead.
 
3.How could I get the best price?
 ---We do wholesale on Alibaba.We will gurantee the benefite for both sides.The price is based on quantity.And We usually offer discount for old customers.


We are looking forward to your contact!
Send your message to this supplier
Avatar
Mrs. Jessica Long
*From:
To: Mrs. Jessica Long
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

Find Similar Products By Category