Gold Member Since 2015
Audited Supplier
Nie-Tech Co., Ltd.

Sensor, Z-Wave Sensor, Alarm manufacturer / supplier in China, offering Zw1105 Shock Sensor, Z-Wave Network on/off Contact Fixture Module with Power Meter, Z-Wave in Wall Smart Switch Control Light with Dimmer and so on.

(/ )

Supplier Homepage Product Pressure Sensor Zw1105 Shock Sensor

Zw1105 Shock Sensor

Purchase Qty.:
1-999 1,000+
FOB Unit Price: US $32 US $19
Purchase Qty. (Pieces) FOB Unit Price
1-999 US $32
1,000+ US $19
Get Latest Price
Port: Shenzhen, China
Production Capacity: 3000
Payment Terms: L/C, T/T, D/P, Western Union, Paypal, Money Gram

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: ZW1105
  • Material: Plastic
  • Customized: Customized
  • Application: Home
  • Range: Min 30m Line of Sight
  • Signal (Frequency): 908.42 MHz
  • Sleeping Mode Current: 8ua Max @DC3.0V
  • Trademark: EVA LOGIK
  • Specification: 78*42*16mm
  • Output Signal Type: Digital Type
  • Certification: UL
  • Usage: Anti-Theft
  • Certificate: FCC, Z-Wave Plus
  • Power Supply: Battery AAA, 3V
  • Operating Temp.: -15°c~60°c(5°f ~140°f)
  • Transmitting Mode Current: 34mA Max @DC 3.0V (20ms/1time)
  • Transport Package: Neutral Packing
  • Origin: Dongguan China
Product Description

Product Description

ZW1105 Shock Sensor
This device is an accessory of the Z-Wave system and enable detection of opened or knocked access your casement window /door in your home. ZW1105 is a wireless, battery powered sensor, its two parts the sensor's body and abuzzer connected.
Technical data 
Zw1105 Shock Sensor
Zw1105 Shock Sensor

1. First, add ZW1105 to ZE300 controller or others, it must be in range of the controller, because the procedure of add to the ZE300 requires direct communication with the controller.
2. Set controller to "Add" mode, quickly pressing learn switch three times (the button is also the anti-packing switch).
3. After correct "Add" it to ZE300 controller it will be signaled by ZE300. 
4. For "Remove" from a network: set up the Z-wave interface controller into "Remove" mode, and following its instruction to delete the ZW1105 from your controller. Press the learn switch of ZW1105 for 1 second at least &release to be excluded. 
5.Use double EVA or screws to fix ZW1105 on the Door/Window two sides, pls. be note correction position of the sensor and the magnet (dot-to-dot).  
6.Re-setting ZW1105: Remove the battery, touch the senor's body with magnet,re-install battery, trigger ZW1105 one time, and reset will be confirmed by LED blink.

Shipping &Packing
Zw1105 Shock Sensor

Send your message to this supplier
Mrs. Irene
To: Mrs. Irene

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

Find Similar Products By Category