Z-Wave Smart Door/Window Entry Alarm with Magnetic Sensor
|FOB Unit Price:||US $32 US $16|
|Purchase Qty. (Pieces)||FOB Unit Price|
|Payment Terms:||L/C, T/T, D/P, Western Union, Paypal, Money Gram|
- Model NO.: ZW1101
- Certification: FCC
- Range: Min 30m Line of Sight
- Color: White
- Standard/Approval: FCC/Z-Wave Plus
- Trademark: EVA LOGIK
- Specification: 7.6(L)*1.73(W)*1.9(H) CM
- Usage: Anti-theft
- Application: Home
- Operation Gap: 30mm
- Frequency: 868.42MHz/865.2MHz/869.0MHz/908.42MHz/921.4MHz
- Delivery Detail: Sample Within 2 Weeks, Mass Production 4~6 Weeks;
- Transport Package: Neutral Packing
- Origin: Guangdong China
This sensor monitors door/window and send Z-Wave™ signal when door or window is opened and closed. ZW1101 is a wireless, battery powered sensor, its two parts the sensor's body and a magnet separate.
*Detects when your door/window is opened or closed
*Magnetic separation trigger function
*Hidden tamper prevention Trigger
*Low battery detection
*LED Status Indicator
|attery Operation:||ER14250*1pc (not include)|
|Range:||Min 30m line of sight|
|Operating temp:||0~40 ºC|
1. First, add ZW1101 to ZE200 controller or others, it must be in range of the controller, because the procedure of add to the ZE200 requires direct communication with the controller.
2. Set controller to "Add" mode, quickly pressing learn switch1 second at least & release to be included (the button is also the anti-packing switch).
3. After correct "Add" it to ZE200 controller it will be signaled by ZE200.
4. For "Remove" from a network: set up the Z-wave interface controller into "Remove" mode, and following its instruction to delete the ZW1101 from your controller. Press the learn switch of ZW1101 for 1 second at least &release to be excluded.
5.Use double EVA or screws to fix ZW1101 on the Door/Window two sides, pls. be note correction position of the sensor and the magnet (dot-to-dot).
6.Re-setting ZW1101: Remove the battery, touch the senor's body with magnet,re-install battery, trigger ZW1101 one time, and reset will be confirmed by LED blink.
The devices are maintenance-free, so never open them. The guarantee becomes void when you open the appliance. Only clean the outside of the devices with a soft, dry cloth or a brush. Prior to cleaning, remove the devices from all voltage sources.
Do not use any carboxylic cleaning agents or petrol, alcohol or similar. These will attack the surface of devices. Besides, the vapors are hazardous to your health and explosive. Do not use any sharp edged tools, screw drivers, metal brushes or similar for cleaning.
Warranty 1 year