Z-Wave Water Leak Detector Flood Sensor (ZW1104)
|FOB Unit Price:||US $48 US $16|
|Purchase Qty. (Pieces)||FOB Unit Price|
|Transport Package:||Neutral Packing|
|Payment Terms:||L/C, T/T, D/P, Western Union, Paypal, Money Gram|
- Model NO.: ZW1104
- Component: SemiConductor Type
- Output Signal Type: Digital Type
- Wiring Type: Wireless
- Customized: Customized
- Application: Home
- Range: Min 30m Line of Sight
- Specification: 72*72*28mm
- HS Code: 9025900001
- Type: Inductive Pressure Sensor
- For: Strain Gauge Pressure Transmitter
- Material: Plastic
- Certification: FCC/IC/Ncc/Z-Wave Certified
- Color: White
- Usage: Anti-Theft
- Trademark: EVA LOGIK
- Origin: Dongguan China
Product DescriptionZ-wave Water Leak Detector Flood Sensor (ZW1104)
This device is an accessory of the Z-Wave system and enable alert/monitor system when water leak detected , easy installation, works with z-wave controller. ZW1104 is a wireless, battery powered sensor, its two parts the sensor's body and a probeconnected.
1. First, add ZW1104 to ZE300 controller or others, it must be in range of the controller, because the procedure of add to the ZE300 requires direct communication with the controller.
2. Set controller to "Add" mode, quickly pressing learn switch three times (the button is also the anti-packing switch).
3. After correct "Add" it to ZE300 controller it will be signaled by ZE300.
4. For "Remove" from a network: set up the Z-wave interface controller into "Remove" mode, and following its instruction to delete the ZW1104 from your controller. Press the learn switch of ZW1104 for 1 second at least &release to be excluded.
5.Use double EVA or screws to fix ZW1104 on the Door/Window two sides, pls. be note correction position of the sensor and the magnet (dot-to-dot).
6.Re-setting ZW1104: Remove the battery, touch the senor's body with magnet,re-install battery, trigger ZW1104 one time, and reset will be confirmed by LED blink.